Organizer got broken after the update ? :/
doesn't seem to store my current job gear/put everything else away outside of mog now
Plugins Broken Via Version Update
Plugins broken via Version Update
interceptor said: »
Organizer got broken after the update ? :/
doesn't seem to store my current job gear/put everything else away outside of mog now
doesn't seem to store my current job gear/put everything else away outside of mog now
Shiva.Spynx said: »
interceptor said: »
Organizer got broken after the update ? :/
doesn't seem to store my current job gear/put everything else away outside of mog now
doesn't seem to store my current job gear/put everything else away outside of mog now
I tried that but sadly it didn't work.the addon acknowledges the items count but for some odd reason it doesn't call them.I tried removing the data file from the addon then reloading everything and still no dice
edit : I should add that it's integrated to my lua file and it's not giving me any errors or anything,but after the update it just won't call the gear for the current job
Be patient until windower resources get updated. This happens anytime they introduce new items. Won't take long.
Uh, so, did something break unityNPC, today it is unable to locate the unity npc, that's it's literal only job.
Never seen that one before.
Edit: there was a windower update that may or may not have caused/fix it... Dunno,can't won't test it till I cap again now. But launching windower prompted the file update.
Never seen that one before.
Edit: there was a windower update that may or may not have caused/fix it... Dunno,
[+]
If they hardcoded the npc IDs, the removal of some linkshell NPCs may have changed those. So it might have needed an update.
Asura.Eiryl said: »
Uh, so, did something break unityNPC, today it is unable to locate the unity npc, that's it's literal only job.
Never seen that one before.
Edit: there was a windower update that may or may not have caused/fix it... Dunno,can't won't test it till I cap again now. But launching windower prompted the file update.
Never seen that one before.
Edit: there was a windower update that may or may not have caused/fix it... Dunno,
LightningHelix said: »
If they hardcoded the npc IDs, the removal of some linkshell NPCs may have changed those. So it might have needed an update.
Bingo.
I had to update the NPC IDs in ~/unitynpc/data/npcs.lua to make it work.
Turn on targetinfo and the [177.....] number it shows there when targetting the NPC is what needs to be changed.
tyalangan said: »
eslim said: »
guildwork addon isnt working (not auto-updating or able to force-update), tf does work mean if it doesnt work ????
guildunworking.
(thanks for the help)
>sidenote: im not talkin angry.
guildunworking.
(thanks for the help)
>sidenote: im not talkin angry.
This problem started for me a few days ago, the plugin automatically updates to guildwork.com just fine, but it is not updating on the ffxiah.com page.
Edit: now I come to think of it, might have something to do with the free to play for everyone -every character unlocked- return home campaign?
Necro Bump Detected!
[73 days between previous and next post]
5/10/21- DistancePlus seems borked. Getting spam messaging of the following:
DistancePlus lua runtime error: distanceplus/distanceplus.lua:124: attempt to index field '?' (a nil value)
happening when targeting anything, be it self, npc, in town targets, pc.
DistancePlus lua runtime error: distanceplus/distanceplus.lua:124: attempt to index field '?' (a nil value)
happening when targeting anything, be it self, npc, in town targets, pc.
Asura.Chiaia said: »
Windower updates will be way late tonight didn't realize it was update night till my phone notified me that Funk had gone live on twitch.
Bahamut.Unagihito said: »
Asura.Chiaia said: »
Windower updates will be way late tonight didn't realize it was update night till my phone notified me that Funk had gone live on twitch.
Aye. Figured it didn't hurt to draw attention for a team that's very small and works their butt off for our benefit rather than just assuming it would happen on its own.
If taken as a whiny complaint on my part, definitely not my intent.
Was just cross-posting it so people saw it, no idea if this will fix your problem.
[+]
I only see the error while on RNG, and it's just the details for Hover Shot (ability id 395) missing in res/job_abilities.lua.
[+]
Just pushed resources 30 seconds ago.
IDK if it'll fix distance plus though. Never really looked at it's code. Will look tonight if it's still an error.
IDK if it'll fix distance plus though. Never really looked at it's code. Will look tonight if it's still an error.
[+]
Asura.Chiaia said: »
Just pushed resources 30 seconds ago.
IDK if it'll fix distance plus though. Never really looked at it's code. Will look tonight if it's still an error.
IDK if it'll fix distance plus though. Never really looked at it's code. Will look tonight if it's still an error.
all kosher. As Teorem said, the only problems were in the resources. Much appreciated^^
[+]
Treasury isn't dropping items I add.
I think organizer is having some issues with gearswap
https://imgur.com/NtSGMpK
only happening when //gs org on my smn job, i think all other jobs are working okay, so a bit confused
https://imgur.com/NtSGMpK
only happening when //gs org on my smn job, i think all other jobs are working okay, so a bit confused
organizer-lib.lua:101 is trying to find the length of tables that don't exist, as the range of the loop iterator id (1,2,3,4) in line 100 doesn't match the previously initialized values in ward_ids (8,10,11,12) in line 63 (and the T-table constructed in line 70).
The loop control in line 100 should probably be changed from:
for id=1,4 do
to:
for _,id in pairs(ward_ids) do
, as in line 67.
I don't use either of these addons--and could certainly be wrong---but am academically curious how that section would have ever worked properly before.
The loop control in line 100 should probably be changed from:
for id=1,4 do
to:
for _,id in pairs(ward_ids) do
, as in line 67.
I don't use either of these addons--and could certainly be wrong---but am academically curious how that section would have ever worked properly before.
Phoenix.Teorem said: »
organizer-lib.lua:101 is trying to find the length of tables that don't exist, as the range of the loop iterator id (1,2,3,4) in line 100 doesn't match the previously initialized values in ward_ids (8,10,11,12) in line 63 (and the T-table constructed in line 70).
The loop control in line 100 should probably be changed from:
for id=1,4 do
to:
for _,id in pairs(ward_ids) do
, as in line 67.
I don't use either of these addons--and could certainly be wrong---but am academically curious how that section would have ever worked properly before.
The loop control in line 100 should probably be changed from:
for id=1,4 do
to:
for _,id in pairs(ward_ids) do
, as in line 67.
I don't use either of these addons--and could certainly be wrong---but am academically curious how that section would have ever worked properly before.
I'll check this out when I get home! Thank you
porterpacker does not work with new moogle in Odyssey
Eidt: I assume zones just need to be added to the list, but i am not sure what the 2nd number refers to
Eidt: I assume zones just need to be added to the list, but i am not sure what the 2nd number refers to
Code
local zones = {
[26] = 621, -- Tavnazian Safehold - (F-8)
[50] = 959, -- Aht Urhgan Whitegate - (I-11)
[53] = 330, -- Nashmau - (H-6)
[80] = 661, -- Southern San d'Oria [S] - (M-5)
[87] = 603, -- Bastok Markets [S] - (H-7)
[94] = 525, -- Windurst Waters [S] - (L-10)
[231] = 874, -- Northern San d'Oria - (K-8)
[235] = 547, -- Bastok Markets - (I-9)
[240] = 870, -- Port Windurst - (L-6)
[245] = 10106, -- Lower Jeuno - (I-6)
[247] = 138, -- Rabao - (G-8)
[248] = 1139, -- Selbina - (I-9)
[249] = 338, -- Mhaura - (I-8)
[250] = 309, -- Kazham - (H-9)
[252] = 246, -- Norg - (G-7)
[256] = 43, -- Western Adoulin - (H-11)
[280] = 802, -- Mog Garden
}GwenStacy said: »
Phoenix.Teorem said: »
organizer-lib.lua:101 is trying to find the length of tables that don't exist, as the range of the loop iterator id (1,2,3,4) in line 100 doesn't match the previously initialized values in ward_ids (8,10,11,12) in line 63 (and the T-table constructed in line 70).
The loop control in line 100 should probably be changed from:
for id=1,4 do
to:
for _,id in pairs(ward_ids) do
, as in line 67.
I don't use either of these addons--and could certainly be wrong---but am academically curious how that section would have ever worked properly before.
The loop control in line 100 should probably be changed from:
for id=1,4 do
to:
for _,id in pairs(ward_ids) do
, as in line 67.
I don't use either of these addons--and could certainly be wrong---but am academically curious how that section would have ever worked properly before.
I'll check this out when I get home! Thank you
This didn't work. When I first load the game before my inventory loads, i can //gs org and it works fine but once everything is loaded it throws the error.
https://imgur.com/qWJVMmJ
Asura.Bippin said: »
porterpacker does not work with new moogle in Odyssey
Eidt: I assume zones just need to be added to the list, but i am not sure what the 2nd number refers to
Eidt: I assume zones just need to be added to the list, but i am not sure what the 2nd number refers to
Code
local zones = {
[26] = 621, -- Tavnazian Safehold - (F-8)
[50] = 959, -- Aht Urhgan Whitegate - (I-11)
[53] = 330, -- Nashmau - (H-6)
[80] = 661, -- Southern San d'Oria [S] - (M-5)
[87] = 603, -- Bastok Markets [S] - (H-7)
[94] = 525, -- Windurst Waters [S] - (L-10)
[231] = 874, -- Northern San d'Oria - (K-8)
[235] = 547, -- Bastok Markets - (I-9)
[240] = 870, -- Port Windurst - (L-6)
[245] = 10106, -- Lower Jeuno - (I-6)
[247] = 138, -- Rabao - (G-8)
[248] = 1139, -- Selbina - (I-9)
[249] = 338, -- Mhaura - (I-8)
[250] = 309, -- Kazham - (H-9)
[252] = 246, -- Norg - (G-7)
[256] = 43, -- Western Adoulin - (H-11)
[280] = 802, -- Mog Garden
}
Asura.Chiaia said: »
Asura.Bippin said: »
porterpacker does not work with new moogle in Odyssey
Eidt: I assume zones just need to be added to the list, but i am not sure what the 2nd number refers to
Eidt: I assume zones just need to be added to the list, but i am not sure what the 2nd number refers to
Code
local zones = {
[26] = 621, -- Tavnazian Safehold - (F-8)
[50] = 959, -- Aht Urhgan Whitegate - (I-11)
[53] = 330, -- Nashmau - (H-6)
[80] = 661, -- Southern San d'Oria [S] - (M-5)
[87] = 603, -- Bastok Markets [S] - (H-7)
[94] = 525, -- Windurst Waters [S] - (L-10)
[231] = 874, -- Northern San d'Oria - (K-8)
[235] = 547, -- Bastok Markets - (I-9)
[240] = 870, -- Port Windurst - (L-6)
[245] = 10106, -- Lower Jeuno - (I-6)
[247] = 138, -- Rabao - (G-8)
[248] = 1139, -- Selbina - (I-9)
[249] = 338, -- Mhaura - (I-8)
[250] = 309, -- Kazham - (H-9)
[252] = 246, -- Norg - (G-7)
[256] = 43, -- Western Adoulin - (H-11)
[280] = 802, -- Mog Garden
}I tried it out just now and it still funky. It lets me deposit things fine, but when I try to withdraw it just brings up the slip selection for me to choose and wont stop even if I click esc. Ody Porter Packer Error
Asura.Chiaia said: »
[298] = 20975717, -- Sheol Gaol - (?-?)
Also its both WoE zone right so 298 and 279?
I haven't really played in like 6+ months so I could only go by the data given to me, since I don't have access to Gaol. I don't really have any answers for you. It's also not an official addon so less people look into things. We did ping Ivaar about it though but they took forever to respond with the last slip change that happened so who knows.
Thank you Chiaia for all the hard work, we do really appreciate your efforts, responding to the community and helping others. If we can support through donations, let us know.
eeternal said: »
Thank you Chiaia for all the hard work, we do really appreciate your efforts, responding to the community and helping others. If we can support through donations, let us know.
[+]
Asura.Chiaia said: »
I haven't really played in like 6+ months so I could only go by the data given to me, since I don't have access to Gaol. I don't really have any answers for you. It's also not an official addon so less people look into things. We did ping Ivaar about it though but they took forever to respond with the last slip change that happened so who knows.
Code
... [279] = 13, -- Sheol Gaol - (?-?) [298] = 13, -- Sheol Gaol - (?-?) ...
The number you're looking for in the 2nd column is the menu ID on 0x034 after you trade a slip to the porter moogle.
ID was the same in P2 after a few tries got me there, but feel free to verify with packetviewer if you have gaol access.
[+]
All FFXI content and images © 2002-2024 SQUARE ENIX CO., LTD. FINAL
FANTASY is a registered trademark of Square Enix Co., Ltd.