Need A Spellcast Command

I'm working on a new spellcast for my pld. I need the command to load a particular spellcast. I still have my old pld spellcast in the same file but would like to load the new one instead. I keep getting errors and I've been browsing the webs for an hr and found nothing. Any advice would help. Does it have to be named a particular name? Yes it is saved as an xml.

I believe it's "//sc load filehere.xml"

Nothing happened even the old one wouldn't load up. I can still type //load spellcast and old one loads. I also tried //load sc NewPLD and nothing.

it is: "sc load profilename" don't put the .xml on the end

try hitting insert and using it from the command box with no //, shouldn't matter either way, but "sc load name" is correct

Neither worked for old or new

NVM i guess it helps to have spellcast loaded first rofl. Thanks for bearing with me. Now i know how that guy felt who didn't know Run Wild would kill his pet. /sadface

/sc f filename works too, you don't need two // (atleast I've never had to) and as was said before You don't need the .xml on the end either or can type the command without any / at all if you do it in the console.

/sc f -loads an xml
/sc r -reloads an xml (and you don't have to put the file name either)
/sc n -gets you ready for a good time.
/sc d -disables all gear swaps. Put the slot in after the d and it'll disable just a single slot.
/sc e -enables all gear swaps. Put the slot in after the e and it'll enable just a single slot.

Those are the ones I use the most. Edit: added disables and enables too.